Portability; Hygiene - KaVo IXS Manuel De L'utilisateur

KaVo IXS
CAUTION
When twisting the disposable covers around the sensor wire, be sure
not to twist the wire.
5. Attach the sensor to the positioner. The sensor will only fit into the holder
one way.
6. Position the sensor appropriately in the part of the mouth to be X-rayed
(refer to specific instructions for use).
Important:
NOTE:
Use of a sensor positioning device is recommended to guarantee that
the sensor is positioned at right angles to the radiation beam and
parallel to the tooth. Positioning devices are supplied with the KaVo
IXS system.

Portability

KaVo IXS can be easily moved from one dental chair to another. Once disconnected
from the USB port of the computer, the sensor may be positioned near a second
dental chair and connected to a USB port present nearby.
The USB technology allows easy connection and disconnection of KaVo IXS even
if the computer is switched on, unless the PC presents particular limitations. No
activation or deactivation procedure is necessary with KaVo IXS, just plug in and
out.

Hygiene

CAUTION
After each patient, the sheath must be removed and the sensor must
be cleaned and disinfected by CaViWipes; h olders should be
disinfected in an autoclave or with a cleaning agent after each patient.
Store disposable sanitary sheaths in a clean, dry place not exposed to sunlight or
UV rays.
Make sure that used sheaths are disposed of as infected waste which is potentially
biologically hazardous.
Important:
Disinfect the image sensor before its first use and whenever there
is a risk of contamination.
5-2
The sensor must be positioned with the sensitive area facing
the source of the radiation. The sensitive side of the sensor is
marked with the KaVo logo.
English