Sony CDX-GT929U Mode D'emploi page 14

CD
For details on selecting a CD/MD changer, see
page 21.
Display items
Example: when you set Info (information) mode
to "All" (page 20).
A
A Source (CD/WMA/MP3/AAC) indication
B Clock
C Album number/Track number/Elapsed
playing time, Track name, Disc name, Artist
name, Album name
To change display items C, press (DSPL).
Tip
Displayed items will differ, depending on the disc type,
recorded format and settings. For details on MP3/
WMA/AAC, see page 24.
Repeat play
1
During playback, press (1) (REP) on
the card remote commander until the
desired setting appears.
Select
Repeat Track
Repeat Album*
* When an MP3/WMA/AAC is played.
To return to normal play mode, select "Repeat
off."
Shuffle play
1
During playback, press (SHUF)
repeatedly until the desired setting
appears.
Select
Shuffle Album*
Shuffle Disc
* When an MP3/WMA/AAC is played.
To return to normal play mode, select "Shuffle
14
off."
B
C
To play
track repeatedly.
album repeatedly.
To play
album in random order.
disc in random order.
Radio
Storing and receiving stations
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1
Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2
Press and hold the multi way encoder.
3
Rotate the multi way encoder until
"BTM" appears, then press it.
The unit stores stations in order of frequency
in the preset list.
A beep sounds when the setting is stored.
Storing manually
1
While receiving the station that you
want to store, push (LIST) up.
The preset list appears.
2
Rotate the multi way encoder to select
the preset number.
3
Push and hold the multi way encoder
until "MEM" appears.
(with the card remote commander)
1
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEM" appears.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
Tip
When an RDS station is stored, the AF/TA setting is
also stored (page 16).
Receiving the stored stations
1
Select the band, then push the multi
way encoder up/down.
(with the card remote commander)
1
Select the band, then press a number
button ((1) to (6)).