GF DIASTAR 025 Manuel D'utilisation page 10

Pneumatic diaphragm valve DIASTAR 025
3 Product description
3.1 Intended use
The DIASTAR 025 pneumatic diaphragm valve is designed exclusively for installation in a compatible industrial piping system to shut
off, pass or regulate the flow of approved medium.
It must be used exclusively within the chemical resistance of the entire fittings and all components.
3.2 Use not in accordance with the intended use
Any use other than that described in the „Intended use" is not in accordance with the intended use and is therefore not permitted.
If unsuitable products are installed or used in safety-relevant applications, unintended operating conditions may occur in the appli-
cation that can cause personal injury and/or property damage.
Only use the product in safety-relevant applications if this use is expressly specified and permitted in the product documentation.
Georg Fischer Piping Systems Ltd. accepts no liability for damage resulting from improper use. The risks associated with improper
use lie solely with the user.
3.3 EC-Declaration of conformity
The manufacturer Georg Fischer Piping Systems Ltd., 8201 Schaffhausen (Switzerland) declares that the subsequently listed
machines are machines according to the listed unifying design standard in terms of the EC Machine Directive 2006/42/EC and
comply with the requirements of this directive that apply to machines. The technical documentation for machines has been
compiled in accordance with Annex VII, Section A of this directive and the CE labels on the machines also indicate this conformity.
Furthermore, we declare that the machines are compatible with the applicable provisions of other stated EU directives.
Product group
Pneumatic diaphragm valves
Schaffhausen, 14.01.2022
Bastian Lübke
Head of Global R&D
Georg Fischer Piping Systems Ltd.
CH-8201 Schaffhausen (Switzerland)
10
Type designation
DIASTAR 025
Operating Instructions
Additional directives and harmonized de-
sign standards
EN ISO 16138
• •
•
•
•
•
•
•
2006/42/EG
2014/68/EU
2011/65/EU
EN ISO 12100
EN 1349
EN ISO 4414
NE 19