CASO DESIGN VC 300 Mode D'emploi page 12

4.2 Control Panel
Buttons (indicator light shows selected function)

Button Vacuum & Seal / Cancel
For automatic vacuuming and sealing of bags or containers. Press the button again to
cancel the operation.

Button Seal
For sealing of a bag without additional vacuum operation.

Pulse Vacuum
As long as you press the button air is with drawn from the bag. If you release the button
this operation will stop. Afterwards seal the bag with Seal button. Also usuable for
canisters.

Button Vacuum Canister
For automatic vacuuming of containers.

Button Food dry & moist
With this function you could adjust the sealing time to the consistency of your vacuum
food. Choose "Dry" for dry vacuum food and "Moist" for moist vacuum food where
liquid is produced.

A connector for vacuum hose for vacuuming of canisters.
4.3 Rating plate
The rating plate with the connection and performance data can be founded on the bottom
of the unit.
Operation
5
This chapter provides instructions on the proper operation of your vacuum sealer.
5.1 Basics of sealing
After each sealing session and before starting up, check to make sure the unit and all
accessories are clean and free of leftover food. Follow the cleaning instructions on in
Chapter Cleaning and Maintenance.
12