Publicité
Les langues disponibles
Les langues disponibles
4.1 Appliance diagram
1) vacuum hose (For vacuuming of canisters)
2) upper gasket
3) handle
4) sealing profile (Presses the bag against the sealing bar)
5) hook for latching of cover
6) lower gasket
7) vacuum chamber
8) sealing bar (Contains a heating wire covered with teflon which allows the bag to seal
but not to stick to the wire. Place the bag over this sealing bar.)
Warning
The sealing bar gets very hot. Please observe the following safety notice in order not to
burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
Please note
► Do not remove the Teflon tape (T).
11
Publicité
