Saving, Retrieving And Deleting Results; Cleaning And Storing The Device And Cuff; Error Messages/Troubleshooting - Beurer BM 35 Mode D'emploi

Blood pressure Systole
value category (in mmHg)
Setting 3:
severe ≥ 180
hypertension
Setting 2:
moderate 160 – 179 100 – 109
hypertension
Setting 1:
mild 140 – 159 90 – 99
hypertension
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)

7. Saving, retrieving and deleting results

• The results of each successful measurement are stored
together with date and time. With more than 60 items of
measured data, the earliest items of data measured are lost.
• Select the desired user memory by pressing the MEM button
and then the + button.
• Press the MEM button again to display the average of all
saved measurements in the user memory.
• If you press the MEM button again, the average value of the
morning measurements for the last 7 days will be displayed
(morning: 5.00 a.m. – 9.00 a.m., display ).
Diastole
Action
(in mmHg)
seek medical
≥ 110
attention
seek medical
attention
regular monitoring
by doctor
regular monitoring
by doctor
self-monitoring
< 80 self-monitoring
• If you press the MEM button again, the average value of the
evening measurements for the last 7 days will be displayed
(evening: 5.00 p.m. – 9.00 p.m., display
• If you continue pressing the MEM button, the latest individual
results are displayed with date and time.
• To clear the memory, press the MEM button, then the dis-
play shows . Press the + button to select the user mem-
ory and confirm by pressing MEM again. Press and hold the
+ and keys simultaneously for 5 seconds (the display will
show ).
• If you wish to change the user memory, see "Select memory".

8. Cleaning and storing the device and cuff

• Clean the device and cuff carefully using a slightly damp
cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under
water, as this can cause liquid to enter and damage the
device and cuff.
• If you store the device and cuff, do not place heavy objects
on the device and cuff. Remove the batteries. The cuff line
should not be bent sharply.ies. The cuff tube should not have
any sharp kinks

9. Error messages/troubleshooting

In case of faults, the _ message appears in the display.
Error messages can occur when
1. inflation pressure is higher than 300 mmHg,
2. blood pressure is unusually high or low
3. you move or talk during the measurement (in addition to
the cardiac arrhythmia icon
22
) .
,
appears in the display ),
,