Substitution Of The Compressor/ Refrigerated Gas; Condenser's Built -In Unit Cleaning; Counter With Electric Defrosting; Garbage Disposal - ChefLine TAVOLO TN-BT Manuel D'installation

EN | Refrigerated Counters | User and Maintenance Manual

5.4 SUBSTITUTION OF THE COMPRESSOR/ Refrigerated gas

In case of compressor damaging and/or replacing, save its refrigerating gas and oil and avoid dispersing it in the
environment.

5.5 CONDENSER'S BUILT -IN UNIT CLEANING

For explanation see the chapter "3. CLEANING".

5.6 COUNTER WITH ELECTRIC DEFROSTING

5.7 GARBAGE DISPOSAL

Plastic, gaskets, sheet metal, polyurethane components, panel controls and electric material in general must be
saved and/or dumped in public dumps and/or garbage authorized centre.
Be sure not to disperse.
Save the refrigerating gas and oil in special tanks, do not dispose of them in the sewage system but dump them
in according to your local laws.

5.8 REQUESTING SPARE PARTS

When requesting spare parts, please say clearly:
• Model of the item
• Serial number of the item
• Quantity of the spare part
Possibly, enclose also a picture of the part to be ordered.
36
Before proceeding with this operation, it is necessary to unplug the unit or to
open the divider placed on the top of the refrigerated counter connection.
If the Counter has electric defrost, avoid touching the heating element of units fi tted with
electric defrosting, as they may still be hot after defrosting cycle. Wait until it cools off, then
proceed with maintenance and cleaning operations.