6.2 Web interface
Browsers supported: Microsoft Internet
Explorer, Microsoft Edge, Google Chrome,
Mozilla Firefox.
6.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to http:/ ip_address.
On first access, the Home page will be displayed.
6.2.2 Home Page
The product control interface is displayed if login is
successful.
The Home page displays the snapshot of the camera
and allows you to check the lenses.
6.2.2.1 Video Snapshot
This area shows a preview of the video that the unit is
recording. The snapshot resolution and its frame-rate
are fixed and differ from the actual characteristics of
the video stream. To view the video stream quality, it
is necessary to use a VMS.
Fig. 3
MNTCMMXCAM_1803_EN
6.2.2.2 Lens control
• Zoom Wide/Zoom Tele
Fig. 4
• Focus Near/Focus Far/Autofocus
Fig. 5
6.2.2.3 Day/Night mode control
• Day Mode/Auto Mode/Night Mode: The Day
Mode inserts the IR filter of the camera. The
Automatic mode, based on the brightness present,
allows the camera to decide on insertion or
removal of the IR filter. The Night Mode removes
the IR filter of the camera.
Fig. 6
The mode selected is indicated by a small, green ball
on the top, right-hand corner. The mode selected is
maintained also in the event the unit is switched off.
Fig. 7
7