Stahl EC-910-AFZ Manuel D'instructions page 10

6.2.2.4 Home management
• Back to Home/Save Home position/Reset Home
position
Fig. 8
6.2.2.5 Preset Management
• Scan Preset/Set Preset/Remove Preset
Fig. 9
6.2.2.6 Device control using the keyboard
It is possible to control the device via the PC
keyboard using the keys indicated in the diagram.
Preset 1 Preset 9
S p a c e B a r
Fig. 10
8
Home Zoom
6.2.3 Device Parameters Page
From menu entry Device Parameters it is possible to
set the name of the device and view other additional
information.
Fig. 11
6.2.4 Network Page
For the device to operate correctly, using
the NTP server, the date and time of the
internal clock and those of the associated
VMS must be synchronised.
From menu entry Network it is possible to change the
network setting of product. It is possible to decide
whether the device requires an address assigned
statically, dynamically with DHCP or self-generated.
The device supports the Internet Protocol (IP) in
version 4.
From the same page it is possible to configure 2 DNS
and decide which mechanisms must be enabled
to automatically identify the devices in the local
network.
MNTCMMXCAM_1803_EN