Stahl EC-910-AFZ Manuel D'instructions page 13

• Options: Configuration parameters
• Noise Reduction: The parameter specifies the
level and consequential mode (2D, 3D) of noise
reduction.
• High Resolution: The parameter activates
enhancement of the contours and produces
more defined images.
• Sharpness: The parameter sets the level of
contour sharpening.
• Defog Mode: The parameter enables the
function that enhances the view in the event
of fog.
• Highlight Correction: The parameter enables
the masking function of the overexposed areas.
• Masking Level Overexposure Correction: The
parameter defines the brightness level beyond
which masking is applied.
• E-Flip Mode: Enables image flipping.
Camera Default: The button resets the camera
settings to default configuration.
Fig. 15
MNTCMMXCAM_1803_EN
6.2.8 Tools Page
From menu entry Tools it is possible to re-set the
predefined values for the entire configuration of
device or only for a number of specific sections.
This section:
• Update the firmware of the device.
• Restart the device.
Fig. 16
11