Publicité
Les langues disponibles
Les langues disponibles
C h a p t e r 6
R
E F E R E N C E
Controlling a TV with the Remote control
The remote control can also be set up to control most TVs. To program the remote
control, use the code that corresponds to your brand.
TV Codes
BRAND
CODE
ANAM
10, 11, 12, 13, 14, 15, 16, 17, 18
NORDMENDE
AIWA
82
BANG&OLUFSEN
57
PANASONIC
BLAUPUNKT
71
BRANDT
73
PHONOLA
BRIONVEGA
57
PIONEER
CGE
52
RADIOLA
CONTINENTAL EDISON
75
RADIOMARELLI
19, 20, 23, 24, 25, 26, 27, 28, 29,
DAEWOO
30 , 31, 32, 33, 34
EMERSON
64
FERGUSON
73
SALORA
FINLUX
06, 49, 57
SAMSUNG
FORMENTI
57
FUJITSU
84
SCHNEIDER
GRADIENTE
70
SELECO
GRUNDIG
49, 52, 71
HITACHI
60, 72, 73, 75
SIEMENS
IMPERIAL
52
JVC
61, 79
SINUDYNE
LG
06, 19, 20, 21, 22, 78
LOEWE
06, 69
TELEAVA
LOEWE OPTA
06, 57
TELEFUNKEN
MAGNAVOX
40
THOMSON
METZ
57
THOMSON ASIA
MITSUBISHI
06, 48, 62, 65
TOSHIBA
MIVAR
52, 77
NEC
83
NEWSAN
68
NOBLEX
66
1.Turn on the TV.
2.Point the DVD's remote control at the TV.
3.While holding the TV POWER button down, enter the code for your brand.
4.If the TV turns off, setup is complete. Enter other codes of the same brand if the
first code does not work.
You can control the TV POWER, CH (
,
functions of another manufacturer's TV.
-
The remote control may not be able to control every model TV of the brands listed.
-
If you replace the remote control's batteries, set the brand code again.
e.g) For Samsung TVs
While holding down the TV POWER button, enter 0 and then 1.
ENG-70
BRAND
CODE
72, 73
NOKIA
74
53, 54, 74, 75
PHILIPS
06, 55, 56, 57
06, 56, 57
58, 59, 73, 74, 75
06, 56
57
RCA
45, 46
REX
74
SABA
57, 72, 73, 74, 75
74
01, 02, 03, 04, 05, 06, 07, 08, 09
SANYO
41, 42, 43, 44, 48
06
74
SHARP
36, 37, 38, 39, 48
71
SINGER
57
57
SONY
35, 48
73
67, 73, 75, 76
72, 73, 75
80, 81
47, 48, 49, 50, 51, 52
WEGA
57
YOKO
06
ZENITH
63
), VOL (+, -) and TV/VIDEO
R
E F E R E N C E
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem
No operations can be
• Check the batteries in the remote control.
They may need replacing.
performed with the
• Operate the remote control at a distance of no more than 20 feet.
remote control.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
5.1 channel sound is
• 5.1 channel sound is reproduced only when the following conditions are met. :
not being reproduced.
1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "5.1 ch" mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
• The features or action cannot be completed at this time because:
The
icon appears
on screen.
1. The DVD's software restricts it.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is out of range.
Disc Menu doesn't appear.
• Check if the disc has a Menu.
Play mode differs from
• Some of the functions selected in the Setup Menu may not work properly if the
the Setup Menu
disc is not encoded with the corresponding function.
selection.
The screen ratio
• The Screen Ratio is fixed on your DVDs.
cannot be changed.
• Make sure you have selected the correct Digital Output in the Audio Options
No audio.
Menu.
The screen is blocked
• Press the
button for more than 5 seconds with no disc inside and the tray
closed. All settings will revert to the factory settings.
• Press the
button for more than 5 seconds with no disc inside and the tray
Forgot password
closed. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
If you experience other
• Go to the contents and find the section of the instruction book that contains
problems.
the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center or call 1-800-SAMSUNG.
The picture is noisy or
• Make sure that the disc is not dirty or scratched.
distorted
• Clean the disc.
ENG-71
Action
Page
P5
P8
P21
P60~61
P53~69
P64~65
P60~61
P23
P67~69
P4
Publicité
