Publicité
Les langues disponibles
Les langues disponibles
C
S
H A N G I N G
E T U P M E N U
Surround Sound Speaker Setup
1
With the unit in Stop
mode, press the MENU
button.
2
Press the
/❷ buttons to
Language Setup
Audio Setup
select Setup, then press
Display Setup
the ❿ or ENTER button.
Parental Setup :
EZ Setup
Setup
3
Language Setup
Press the
/❷ buttons to
Audio Setup
select Audio Setup, then
Display Setup
press the ❿ or ENTER
Parental Setup :
button.
EZ Setup
Setup
4
AUDIO SETUP
Dolby/DTS Digital Out
: PCM
Press the
/❷ buttons to
Dynamic Compression
: On
select Speaker Setup,
PCM Down Sampling
: On
Speaker Setup
then press the ❿ or
ENTER button.
5
SPEAKER SETUP
C
Press the
/❷/➛/❿
L
LFE
buttons to select the
Small
Small
On
Small
desired item, then press
Small
Small
User
Test
the ENTER button to set
SL
the size.
ENG-62
❿
❿
❿
❿
❿
❿
❿
❿
❿
❿
❿
To exit the setup menu, press the MENU
button.
R
SR
C
S
H A N G I N G
E T U P M E N U
The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small).
Select the size of the speakers to be connected.
Front (FL, FR)
- Large: Outputs the bass frequencies of the speaker from the Front(FL, FR).
- Small: If the sound distorts or the surround sound effects are difficult to hear, select this.
This activates the Dolby Digital bass redirection circuitry and outputs the bass
frequencies of the speaker from the subwoofer.
Center
- None: If you do not connect a center speaker, select this.
- Large: Outputs the bass frequencies of the center speaker.
- Small: If the sound distorts, select this.
This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of
the center speaker from other speakers.
Surround (SL, SR)
- None: If you do not connect a center speaker, select this.
- Large (Rear/Side): Outputs the bass frequencies of the rear speaker.
- Small (Rear/Side): When the sound distorts or the surround sound effects are difficult to hear,
select either of these according to the rear speaker's position.
This activates the Dolby Digital bass redirection circuitry and outputs the
bass frequencies of the rear speaker from other speakers.
Setting up Test
The test output signals come clockwise starting from the Front Speaker(L).
Adjust Channel Balance so that speakers output equally in your room.
FRONT(L)
CENTER
SUBWOOFER
FRONT(R)
Note
To make the Setup menu disappear or return to menu screen during set up, press RETURN or
➛
button.
• The subwoofer test output signal is lower in volume than the other speakers.
• The MPEG Multichannel logo is a trademark registered by the PHILIPS Corporation.
• If you set Front (L, R) "Small", LFE (Subwoofer) is set "On" automatically.
ENG-63
SURROUND(R)
SURROUND(L)
Publicité
