Publicité
Les langues disponibles
Les langues disponibles
11. Troubleshooting
By purchasing the DAB+ radio, you have acquired a product designed to the state of
the art and operationally reliable. Nevertheless, problems or errors may occur. There-
fore, we would like to describe how to eliminate possible errors here:
Always observe the safety information!
No function after the device has been switched on:
• The AC/DC adapter is not properly plugged into the socket or the low-voltage plug is
not correctly connected to the AC/DC adapter connection DC 6V.
• The mains socket is not supplied with current.
• No batteries are inserted in case of battery operation or the batteries are discharged.
No sound is audible at playback:
• The volume is set too low.
• The installed speaker is off because headphones are connected.
• Radio reception is too weak.
Interference signals are audible. Operation is impaired or the display shows no clear
indication:
• The device is subject to interference from other devices with high interference emis-
sion (e.g. a mobile phone).
• The integrated microprocessor must be reset. Switch the device off and on again or
reset it to factory settings.
Radio reception is impaired or impossible:
• Extend the telescopic aerial to its full length and try out different alignments.
• Set up the device elsewhere.
• Check if DAB broadcasting is available in your area.
40
Publicité
