4. After removing the packaging, check that the appliance is
in perfect condition. The packaging materials must not be
left within reach of children as they can be dangerous.
5. THE MANUFACTURER IS NOT RESPONSIBLE FOR
DAMAGES TO PERSONS OR PROPERTY CAUSED BY
FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS
MANUAL.
6. The manufacturer reserves the right to make any changes
it deems advisable to its models, although the essential
features described in this manual remain the same.
7. Before connecting, make sure that the plate data
corresponds with the mains electrical supply.
The data plate is located on the appliance.
8. Install it according to the manufacturer's instructions
An incorrect installation can cause damage to people,
animals or property for which the manufacturer accepts
no responsibility.
9.
Always and only use the appliance in horizontal position.
Position the appliance in an appropriate environment and
on a stable and plane surface.
10. Always unreel the cable completely during use.
11. The appliance is equipped with a power cord with plug
(Y-type connection). If the power cord is damaged, it must
be replaced by the manufacturer, his technical service
or a similarly qualified person in order to eliminate all
possible risks.
12. Install it in such a way that the switches and other controls
cannot be reached by persons using the bath or shower.
13. Do not use extensions, if not with particular care.
14. Keep the appliance at a distance of at least 1m from other
objects (fig. 1).
14a. To avoid the risk of fire, keep the outlets and air intakes
of the appliance at a distance of at least 1 m from any
object, curtains, tissues or flammable materials.
15. Do not place appliance close to a radiant heat source.
16. Do not use the appliance to dry clothes.
17. Do not insert or allow foreign objects to enter any
ventilation or exhaust opening, as this may cause an
electric shock, fire or damage to the appliance.
CALDO RADIALE
EN - 3