The Package Contains; Fitting The Socket - Quick HRC 1002 Manuel De L'utilisateur

CHARACTERISTICS AND INSTALLATION
GB
MULTIPURPOSE CONTROL PANEL
The Quick ® multipurpose control panel is an instrument designed for the remote control of
various moving systems on board a boat, including mini-crane, gangplank, swimming ladder,
anchor hoist.
INSTALLATION
BEFORE USING THE INSTRUMENT PLEASE STUDY THIS USER MANUAL. IN CASE OF ANY
DOUBT PLEASE CONTACT THE RETAILER OR QUICK
The control was designed for the purposes described in this user manual. The company Quick
does not accept any responsibility for direct or indirect damage caused by the improper use of
the device, by incorrect installation, or for any errors in this user manual.
WARNING:
with safety systems to prevent damage to persons, things, or the environment that
might result from the defective operation of the control panel.
THE OPENING OF THE INSTRUMENT BY UNAUTHORIZED PERSONNEL MAKES THE
WARRANTY VOID.
THE PACKAGE CONTAINS: control panel, support, socket, socket seal and cover, screws,
drilling template, personalised adhesives (only in certain models), the present manual of use.

FITTING THE SOCKET

A typical installation procedure is described below.
It is not possible to define a single procedure that is applicable in every situation.
Adapt the procedure described here to your own requirements.
Identify the most appropriate position for the socket seating on the basis of the following
criteria:
• The socket must be positioned so that it can easily be reached by the operator.
• Choose a clean, smooth, flat location.
• Rear access is required for installation and maintenance.
• There must be sufficient space behind the chosen position for the passage of the socket
cable.
• The back of the socket must not be exposed to contact with water or humidity.
• Take particular attention when drilling the panels or parts of the boat. The holes must not
weaken or cause the breakage of structural elements of the boat.
12
the electrical appliance controlled by the control panel must be provided
® CUSTOMER SERVICE.
®