Güde SP18-0 Traduction Du Mode D'emploi D'origine page 16

ENGLISH
Technical Data
Battery silicone gun
Art. No
Input voltage
Compressive force
Feed rate
Cartridge volume
Net/gross weight
Read and understand the operating
instructions before using the appliance.
Familiarise with the control elements
and how to use the appliance properly. Abide by all the
safety measures stated in the service manual. Act
responsibly toward third parties.
The operator is responsible for accidents or risks to third
parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operation
refer please to our customer center
This appliance has not been designed to be used by per-
sons (including children) with reduced physical, sensory
or mental capabilities or with a lack of knowledge or
experience.
Children must be supervised in order not to play with
the machine.
Specified Conditions of Use
The silicone gun is designed for drawing silicone joints
on corners and surfaces.
Not observing general regulations in force and instruc-
tions from this manual does not make the manufacturer
liable for damages.
Please note that our equipment has not been designed
for commercial, craft or industrial use. If the equipment
is used in commercial, craft or industrial operation or for
similar activities, we cannot assume any liability.
The machine may only be used in a technically perfect
condition and taking into account all safety information.
Residual Risk
Even when the device is used properly and all safety
regulations are complied with, there still may be some
residual risks.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and
summon qualified medical attendance as quickly as pos-
sible. Protect the injured person from further harm and
calm them down. If you seek help, state the following
pieces of information:
12
SP18-0
58415
18 V
4500 kN
0,7 | 2 | 4,5 | 6 | 8 | 11 mm/Sek.
310 ml
2 / 2,6 kg
1. Accident site,
2. Accident type,
3. Number of injured persons,
4. Injury type(s)
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future refe-
rence. The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes..
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
1) Electrical safety
a) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded..
b) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
2) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.