Cisco Catalyst 4500 Instructions page 7

Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(11b)EW,
EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 14-May-02 13:31 by hqluong
Image text-base: 0x00000000, data-base: 0x00B1C1F8
cisco WS-C4006 (MPC8245) processor (revision 5) with 262144K bytes of memory.
Processor board ID FOX04169082
Last reset from Reload
32 FastEthernet/IEEE 802.3 interface(s)
18 Gigabit Ethernet/IEEE 802.3 interface(s)
467K bytes of non-volatile configuration memory.
Uncompressed configuration from 1732 bytes to 4359 bytes
Press RETURN to get started!
00:00:21: %SYS-5-CONFIG_I: Configured from memory by console
00:00:21: %LINK-3-UPDOWN: Interface GigabitEthernet1/2, changed state to up
00:00:21: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (TM) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(11b)EW,
EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 14-May-02 13:31 by hqluong
00:00:21: %SNMP-5-COLDSTART: SNMP agent on host Switch is undergoing a cold start
00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/2,
changed state to up
00:00:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/2,
changed state to up
Switch>
Switch>
Switch>
3. Exécutez la commande enable pour passer en mode EXEC, comme le montre cet exemple :
Switch>enable
Password:
Switch#
4. Le système est de nouveau opérationnel. Émettez la commande dir bootflash: pour noter le
fichier dans le bootflash : ou émettez la commande dir slot0: si vous avez chargé le fichier
système présent dans le slot0:.
Switch#dir bootflash:
Directory of bootflash:/
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706