Harman AKG MicroMic C 411 lll Mode D'emploi page 16

2 Interfacing
2.3 C 411
2.3.1 Using the
Optional B 29 L
B 29 L
Fig. 3: Using the B 29 L to power the microphone.
Refer to fig. 3.
Important!
Refer to fig. 3.
Balanced input:
Unbalanced input:
16
L The optional B 29 L battery supply allows you to
III
connect the pickup to balanced or un balanced
inputs with no phantom power.
1. Connecting the cable: Push the mini XLR
connector (1) on the pickup cable into one of
the two mini XLR sockets on the B 29 L (2) to
the stop.
The connector will lock automatically.
Disconnecting the cable: To disconnect the
cable, press the unlocking button on the mini
XLR connector (1) and pull the connector (1)
out of the socket.
To avoid damaging the cable, never try to
pull out the cable itself!
2. Connect the B 29 L (2) to the desired input.
• Use a commercial XLR cable (3) to connect
the B 29 L (2) to a balanced input.
• Refer to section 2.2.2 above.