SOUNDMASTER IR3200 Mode D'emploi page 41


Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment)
information broadcast by the station giving real-time information such as programme name,
track title and contact details. Stereo broadcasts are indicated with an icon at the bottom of the
screen. To view further information, press Info button on the radio.
Each time you press Info button on the radio, another set of information is displayed, cycling
through DLS text, programme type, ensemble name/frequency, signal strength/error rate, bite
rate/codec/channels and today's date.
SETTINGS

Dynamic range compression (DRC)
If you are listening to music with a high dynamic range in a noisy environment, you may wish to
compress the audio dynamic range. This makes quiet sounds louder, and loud sounds quieter.
You can change DRC as off, low or high.

Station order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid lists
valid stations first, alphanumerically, then off-air stations.
FM radio mode receives analogue radio from the FM band and
displays RDS (Radio Data
System) information about the station and where broadcast.
To find a station, press Tuning / Select / Snooze knob. The
frequency display starts to run up as IR3200 scans the FM band.
Alternatively, you can scan up or down by rotating Tuning / Select
/ Snooze knob.
NOTE: The tuning direction will be followed the last tuned
direction.

Preset
To store an FM radio preset, press and hold the "Preset" button until the display shows the
Save preset screen. Select one of the 10 presets to save the current station. Or press and hold
any of the "1" to "5" buttons on the remote control to store the current playing station into the
preset directly.
To select a preset, press briefly on the "Preset" button, then select one of the listed preset
stations. Or press any of the "1" to "5" buttons to directly recall "1" to "5" presets. Use the "Shift"
button to pre-select preset number 6-10.
You can also use the later mentioned UNDOK app for storing or recalling the presets.
FM
16
IR3200 / English Instruction Manual