SOUNDMASTER IR3200 Mode D'emploi page 31

For the wireless connection, you will be asked for input the
encryption in the next step. To enter the network's key, use
the "Tuning/Select" knob to move the cursor through the
characters and select "OK" to confirm. As each character is
selected, the key is built up near the top of the display.
There are three options accessible by tuning the navigate
reel back before the first characters – Backspace, OK and
Cancel.
WPS encrypted network
WPS encrypted networks are identified by WPS at the start of the network name
when the
IR3200 searches the available AP. Use one of the following methods of connection:
There is the shortcut WPS key on the unit.
Push button
IR3200 prompts you to press the connect button on the
router. It then scans for a ready Push Button Connect
network and connects.
Pin
IR3200 generates an 8-digit code number which you enter
into the wireless router, access point, or an external registrar.
Skip WPS
Enter key as for a standard encrypted network.
For more information on setting up a WPS encrypted network, see your WPS router's
instructions.
Completion
IR3200 attempts to connect to the selected network.
It will show connected if the setup is successful. If
connecting fails,
IR3200 returns to a previous screen to try again.
Press "Tuning/Select" to quit the setup wizard.
IR3200 / English Instruction Manual
6