SOUNDMASTER IR3200 Mode D'emploi page 40

DAB mode receives DAB or DAB plus digital radio signal and
displays information about the station, streaming audio and the
programme details.

Scanning for stations
The first time you select DAB radio mode, or if the station list is
empty, IR3200 automatically performs a full scan to see what
stations are available. You may also need to start a scan manually
to update the list of stations for one of the following reasons:
 Available stations change from time to time.
 If reception was not good for the original scan, this may
result in an empty or incomplete list of available stations.
 If you have poor reception of some stations (burbling), you
may wish to list only stations with good signal strength.
To start a scan manually, choose Full scan. To scan only stations with good signal strength,
select Local scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune invalid.
Turn the navigate reel to view a list of stations and press to select. Once selected, the station
plays and the screen shows information about station, track or show as broadcast.

Presets
To store an DAB preset, press and hold the "Preset" button until the display shows the Save
preset screen. Select one of the 10 presets to save the current station. Or press and hold any of
the "1" to "5" buttons on the remote control to store the current playing station into the preset
directly.
To select a preset, press briefly on the "Preset" button, then select one of the listed preset
stations. Or press any of the "1" to "5" buttons to directly recall "1" to "5" presets. Use the "Shift"
button to pre-select preset number 6-10.
You can also use the later mentioned UNDOK app for storing or recalling the presets.
DAB
15
IR3200 / English Instruction Manual