ARIETE 2775 Mode D'emploi page 11

DESCRIPTION OF THE APPLIANCE (Fig. 1)
A Dust container handle
B Foot-operated cord rewinder button
C Appliance body
D Suction device coupling
E Dust container
F Foot-operated on/off switch
G Narrow suction nozzle with brush
ATTACHMENTS
Extension tubes (P)
Insert the extension tubes onto the handgrip and then fit the required attachment.
Floor brush (I)
- Ideal for cleaning large areas as well as corners that are difficult to reach.
- We advise against using the brush to clean carpets and resistant floors. The brush has wheels to allow
it to glide over all surfaces. Select the required projection for the bristles by pressing the lever at the
end of the brush. To retract the bristles, press the lever marked with the
- For better preservation and protection of smooth flooring such as PVC, parquet or tiles, it is better
to use the brush. To lower the bristles, press the lever marked with the
symbol.
Narrow suction nozzle with brush (G)
This suction device is ideal for cleaning between the folds on fabrics, joints, corners or niches that
are impossible to reach using the floor cleaning device. This attachment can also be fitted directly
to the handle (N).
VACUMM CLEANER ASSEMBLY
iMPoRtAnt: Before fitting or removing attachments, always make sure that the vacuum
cleaner has been unplugged from the power mains.
- Insert the hose (H) into the air inlet (D) turning it gently until it locks into place (Fig. 2).
- Insert one extension tube (P), or both if necessary, onto the handgrip (N).
- Insert the required attachment onto the extesion tube.
USING THE APPLIANCE
CAution: Before using the vacuum cleaner, remove all large or sharp objects from the floor
to avoid any possible damage to the cleaner itself.
First of all, before using this appliance, unwind the power cord completely and plug the appliance
into the mains socket.
To switch on, press the foot switch (F) on the appliance. The cleaner is equipped with wheels to
move it easily during use.
IMPORTANT: The appliance might make a whistling sound that will stop after a few seconds.
H Suction hose
I Floor brush
L Hard floor / carpet selector switch
M Manual air intake valve
N Handle
O Attachment fitting
P Extension tubes
- 9 -
EN
carpet symbol
smooth flooring