Parkside PASA 20-Li B2 Traduction Des Instructions D'origine page 7

CORDLESS GARDEN SAW 20V
PASA 20-Li B2
Introduction
Congratulations on the purchase of your new tool.
You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified range of applications. Please also
pass these operating instructions on to any future
owner.
Intended use
This tool – nominally, a reciprocating saw – is
intended for sawing wood, plastics and building
materials up to a fixed stop (base plate). The tool
is suitable for rough sawing, straight and curved
cuts and cuts surfaces flush. With the grip bracket
mounted, the appliance is suitable for sawing
branches. Observe the information on saw blades
and the working instructions for sawing. Any
other uses of or modifications to the machine are
deemed to be improper usage and may result in
serious physical injury. The manufacturer accepts
no responsibility for damage(s) attributable to
misuse. This tool is not intended for commercial use.
│ GB │ IE
■ 2
Features
Safety lock-out
Handle
Battery pack*
Release button for the battery pack
ON/OFF switch
Saw blade
Base plate
Quick-release chuck
Hand guard
Release (grip bracket)
Grip bracket
High-speed charger*
Control LED (red)
Control LED (green)
Battery charge level button
Battery display LED
Package contents
1 cordless garden saw 20V
1 grip bracket
1 saw blade for cuttings – HCS,
152 x 1 mm, 6 TPI
NOTE
► TPI = teeth per inch = the number of teeth per
2.54 cm
1 carrying case
1 set of operating instructions
PASA 20-Li B2