Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
4. Place the tank seat on the ground and place a 20 lb. propane tank into the designated area in the center.
Once the tank is level and steady, tighten down the screw on the side of the tank seat to secure the tank
in place.
5. Connect the LP Gas Tank
Before connection, be sure there is no debris caught in
the collar of the gas cylinder, the regulator valve or the
burner and burner ports.
Connect the gas line to the tank by turning the
connection knob clockwise. Hand tighten only.
Disconnect the LP Gas Tank
To disconnect the LP tank, make sure the valve on the
LP gas tank is completely closed.
Disconnect the connection knob by turning it counter-
clockwise until it is detached from the valve.
!
WARNING
Place the LP tank 60" (152.4cm) away from the fire
table and locate the hose away from pathways or
places where it could become damaged.
Watch your step while moving between the tank and
the fire table. Be careful not to trip on the hose.
9
"
60"
60
Publicité
