LG WKGX201HBA Manuel D'utilisation page 34

en-us_main.book.book Page 34 Friday, December 2, 2022 4:27 PM
34 SMART FUNCTIONS
(2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated
with a minimum distance of 20 cm (7.8 inches)
between the antenna and your body.
NOTE
• THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD
VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
Open Source Software Notice
Information
To obtain the source code that is contained in this
product, under GPL, LGPL, MPL, and other open
source licenses that have the obligation to disclose
source code, and to access all referred license
terms, copyright notices and other relevant
documents, please visit https://
opensource.lge.com.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email
request to opensource@lge.com.
This offer is valid to anyone in receipt of this
information for a period of three years after our
last shipment of this product.
Smart Diagnosis
Use this feature to help you diagnose and solve
problems with your appliance.
NOTE
• For reasons not attributable to LGE's negligence,
the service may not operate due to external
factors such as, but not limited to, Wi-Fi
unavailability, Wi-Fi disconnection, local app
store policy, or app unavailability.
• The feature may be subject to change without
Using LG ThinQ to Diagnose Issues
If you experience a problem with your Wi-Fi
equipped appliance, it can transmit
troubleshooting data to a smartphone using the
LG ThinQ application.
• Launch the LG ThinQ application and select the
Using Audible Diagnosis to
Diagnose Issues
Follow the instructions below to use the audible
diagnosis method.
• Launch the LG ThinQ application and select the
1
2
3
TM
Function
4
NOTE
• For best results, do not move the smartphone
prior notice and may have a different form
depending on where you are located.
TM
Smart Diagnosis feature in the menu. Follow
the instructions provided in the LG ThinQ
application.
TM
Smart Diagnosis feature in the menu. Follow
the instructions for audible diagnosis provided
in the LG ThinQ application.
Press the Power button to turn on the
appliance.
• Do not press any other buttons.
Hold the mouthpiece of your phone in front of
the appliance.
• Washer: Hold the phone to the right of the
Start/Pause button.
• Dryer: Hold the phone to the left of the
Power button.
Press and hold the Steam + Extra Rinse
(Washer) / Steam + Reduce Static (Dryer)
buttons for 3 seconds or until the audible
tones start. Hold the smartphone mouthpiece
to the logo until the data transfer is complete.
• Keep the smartphone in place until the data
transfer has finished. Time remaining for
data transfer is displayed.
After the data transfer is complete, the
diagnosis will be displayed in the application.
while the tones are being transmitted.