Publicité
Les langues disponibles
Les langues disponibles
en-us_main.book.book Page 17 Friday, December 2, 2022 4:27 PM
• These buttons allow you to select additional cycle options. Certain buttons also allow you to activate
special functions by pressing and holding the button for 3 seconds.
Remote Start
Use a smartphone to control your washer remotely.
- For more information, see SMART FUNCTIONS in this manual.
Wi-Fi
When the washer is connected to a home Wi-Fi network, the
- To connect the washer to the LG ThinQ application, press and hold the Temp. button for 3 seconds.
Time and Status Display
Wi-Fi Indicator
a
• This indicator is lit when the product is connected to a home Wi-Fi network.
Remote Start Indicator
b
• This indicator lights up when the Remote Start feature is activated.
Door Lock Indicator
c
• This indicator lights up when the cycle starts and the door is locked.
• The indicator light stays on until the cycle is paused, stopped or has finished.
Signal Indicator
d
• This indicator lights up when the end-of-cycle and button tones are turned on.
Estimated Time Remaining
e
• When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers
or options are selected.
• If the display shows
size.
• The time shown is only an estimate. This time is based on normal operating conditions. Several
external factors (load size, room temperature, incoming water temperature, etc.) can affect the actual
time.
NOTE
• Once the Start/Pause button is pressed, the washer will measure the size of the load. The estimated
time may change once the load size has been measured.
AI DD Indicator
f
• This feature offers optimized washing by detecting the load size and laundry characteristics.
The indicator lights up when the Normal cycle is selected with a Warm wash temperature setting.
, then the time will be displayed after the load sensing has detected the load
-I--
OPERATION-WASHER
f
icon on the control panel is lit.
17
Publicité
