Sanitas SBM 22 Mode D'emploi page 38

Cuff size 22 to 36 cm
Permissible opera- +10°C to +40°C, 10 to 85% relative
ting conditions humidity (non-condensing)
Permissible sto- -20°C to +55°C, 10-90% relative humi-
rage conditions dity, 800-1050 hPa ambient pressure
Power supply 4 x 1.5 V
Battery life For approx. 300 measurements, depen-
ding on levels of blood pressure and
pump pressure
Classification Internal supply, IP21, no AP or APG,
continuous operation, application part
type BF
The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notifica-
tion to allow for updates.
• This device complies with European Standard
EN 60601-1-2 (In accordance with CISPR 11,
IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-7, IEC 61000-4-8,
IEC 61000-4-11, EN 55024) and is subject to particular
precautions with regard to electromagnetic compatibility.
All manuals and user guides at all-guidesbox.com
AA batteries
Please note that portable and mobile HF communication
systems may interfere with this unit.
• The device complies with the EU Medical Devices Di-
rective 93/42/EEC, the German Medical Devices Act
(Medizinproduktgesetz) and the standards EN 1060-3
(Non-invasive sphygmomanometers – Part 3: Supplemen-
tary requirements for electro-mechanical blood pressure
measuring systems) and IEC 80601-2-30 (Medical electri-
cal equipment – Part 2 – 30: Particular requirements for
the basic safety and essential performance of automated
non-invasive sphygmomanometers).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical
purposes, it must be regularly tested for accuracy by
appropriate means. Precise instructions for checking ac-
curacy may be requested from the service address.
13. Warranty / Service
Hans Dinslage GmbH, Riedlinger Straße 28, 89524 Utten-
weiler, Germany (hereinafter referred to as "HaDi") provides
a warranty for this product, subject to the requirements
below and to the extent described as follows.
The warranty conditions below shall not affect the
seller's statutory warranty obligations which ensue from
the sales agreement with the buyer.
38