Operation
8.6
Switching the light on/off
The interior LED turns on when the device is opened and turns off when it is closed.
➤ To switch on or off the interior LED while you keep the door open, press the light
button. The interior LED to switches on when you open the door next time.
EA15F, EA24B, EA24D, EA24F only
➤ To switch on or off the interior LED permanently press the light button for
6 seconds.
✔ The manual light setting is activated.
✔ The display shows "CL" for a few seconds when the manual light setting is
switched on.
✔ The display shows "OP" for a few seconds when the manual light setting is
switched off.
8.7
Setting the temperature
➤ Press the setting button to adjust the temperature by 1 °C/1 °F.
✔ The temperature value on the display flashes during the temperature setting.
3 seconds after setting the temperature, the display shows the current tempera-
ture in the device. The temperature value changes by increasing or decreasing
until the set temperature in the device is reached.
8.8
Changing the temperature unit
➤ Press the setting buttons simultaneously for a 2 seconds to change the tempera-
ture unit.
✔ The symbol for the corresponding unit lights up.
32
DE15F, DE24F, EA15F, EA24B, EA24D, EA24F
EN