Dometic DE15F Instructions De Montage Et De Service page 29

DE15F, DE24F, EA15F, EA24B, EA24D, EA24F
6.6 Connecting the device to the power supply
A
NOTICE! Damage hazard
• Do not modify or damage the plug.
• Do not plug the device in an socket that can be turned off by a switch
or pull chain.
• To avoid voltage drops and loss of performance do not use adapters,
extension cords, or power strips.
• Ensure that an residual current circuit breaker is installed to the
power supply. Seek advice from a trained electrician.
• Observe the input voltage (see chapter "Technical data" on
page 40).
I
NOTE
Let the device stand upright for 24 hours before connecting it to the
power supply.
➤ Plug the device into a AC socket.
6.7 Adjusting the feet
I
NOTE
The bottom of the device must be horizontal.
➤ Ensure the device is level by adjusting the feet (fig. j, page 12).
6.8 Changing the door hinge
The hinge of the door can be changed so that it opens to the left instead of to the
right.
➤ Change the door hinge (fig. k, page 13 to fig. n, page 16).
6.9 Adjusting the shelves
➤ Adjust the shelves (fig. n, page 16 to fig. p, page 17).
EN
Installation
29