Publicité
STEP 3
If the door is larger than the
opening, ADD the door overlay
to the Step 1 dimensions. If the
door is smaller than the opening
SUBTRACT the inset gap from the
Step 1 dimensions. Mark screw
locations to the center of the thick
portion of the door, pre-drill pilot
holes, and attach door with (4) 6 x
1/2" flat head screws (See Figure
17).
NOTE: Minor adjustments like
skew and tilt can be made on
the bracket mounting bolts (See
Figure 18).
STEP 11
Once you have installed the door
on your product, add the OXO
container into the wood frame.
Drop in your waste bins (4WCOX)
or hamper with beauty ring
(4WHOX) into the large opening.
(See Figures 19-21).
Note: The wood beauty ring
must be installed with the thinner
side closest to the door for
proper clearance when removing
the hamper (See Figures 22 and
23).
6
FIG. 17
FIG. 19
FIG. 22
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG. 18
Mark screw locations
FIG. 20
FIG. 23
T-Nut Screw
FIG. 21
Publicité
