Publicité
STEP 1
To assemble the slides, attach the
cross bar to the feet (See Figure 1).
STEP 2
Attach the left and right slides
respectively to the top of the feet.
Push down until you feel a "snap"
(See Figure 2).
STEP 3
Decide which side you want the
OXO sidecar on. If it needs to be
on the right side, proceed to Step
4, otherwise move on to Step 9
(See Figure 3). Be mindful of walls
or appliances that might obstruct
access to the OXO container and
drawer box when choosing your
orientation.
STEP 4
If you wish to reverse the
orientation of the drawer box,
disengage the ball-bearing slides
on the OXO sidecar with the black
triggers (See Figure 4).
STEP 5
Unscrew the outer members from
the wood chassis with a short
screwdriver and flip the slides
around 180 degrees to line up with
the pilot holes (See Figures 5-7).
2
FIG. 1
FIG. 2
FIG. 3
Sidecar
FIG. 4
FIG. 5
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG. 6
FIG. 7
Publicité
