ESAB Versotrac Cadet EWT 1000 Manuel D'instructions page 45

ANNEXE
Versotrac Cadet EWT 1000
0443 682 881 V-wheeltrack steel (4 pcs)
0443 682 880 V-wheeltrack steel (1 piece)
0332 947 880 Bracket suction
0904 223 880 Work piece voltage reference brush
0413 542 880 Guide wheel bogey. For V-joints, used for
joint tracking, for fitting on the contact tube.
0154 203 880 Guide rail with magnets, 3 m (9.8 ft).
Several lenghts of guide rail can be used.
Welding head
0821 440 984 Laser lamp kit, 0.5 m (1 ft 7.7 in.) cable
Welding cable with cable lug
0413 768 899 95 mm², 15 m (49 ft)
0413 768 882 95 mm², 24 m (78 ft)
0413 768 885 95 mm², 34 m (111 ft)
0413 768 911 95 mm², 50 m (164 ft)
0413 768 912 95 mm², 75 m (246 ft)
0413 768 896 120 mm², 15 m (49 ft)
0413 768 889 120 mm², 24 m (78 ft)
0413 768 892 120 mm², 34 m (111 ft)
0413 768 907 120 mm², 50 m (164 ft)
0413 768 913 120 mm², 75 m (246 ft)
0810 093 880 Flexible arm
0148 140 880 Flux recovery unit OPC
0413 315 881 Flux hopper of silumin alloy
0145 221 881 Concentric flux feeding funnel
0463 893 001 - 45 - © ESAB AB 2023