Safety; Intended Use; Prohibited Use - Zipper Maschinen ZI-BTM160 Manuel D'utilisation

11

SAFETY

Intended Use

The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
concrete and mortar production.
Any manipulation of the machine or its parts is a misuse, in this case
and its sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
Ambient conditions
The machine may be operated:
humidity
temperature
The machine shall not be operated in areas exposed to increased fire or explosion hazard.

Prohibited use

 The operation of the machine outside the stated technical limits described in this manual is
forbidden.
 Operation of the machine with open motor cover is prohibited.
 The use of the machine not being suitable for the use of the machine and not being certified is
forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in this usermanual is forbidden.
 The unattended operation on the machine during the working process is forbidden!
 It is not allowed to leave the immediate work area during the work is being performed.
 The machine is not permitted for the processing of food!
 Any other utilisation counts as improper use especially mixing combustible or explosive materials is
forbidden
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-BTM160 ZI-BTM180
ZIPPER-MASCHINEN
max. 70%
+5°С to +40°С (+41°F to +104°F)
SAFETY
25