Publicité
Les langues disponibles
Les langues disponibles
SH-FX70_RQTX0170-Y_En.book Page 6 Wednesday, March 4, 2009 3:15 PM
Setup
Preparation
≥ Turn off all equipment before connection and read the appropriate
operating instructions.
≥ Connect the AC power supply cord after all other connections are
complete.
[Note]
≥ Do not use the wireless system and digital transmitter in a metal cabinet
or bookshelf.
≥ Do not attempt to connect any extra surround speakers to the home
theater unit.
≥ Place the wireless system within approximately 15 m (47 ft) from the
home theater unit.
To avoid interference, maintain the following distances between
the wireless system and other electronic devices that use the
same radio frequency (2.4 GHz band).
e.g.
Wireless
system
The wireless system will automatically seek a clear channel if any of
these other devices interfere with its communication.
When this happens, the wireless link indicator (" [W1] " or an indicator)
flashes on the home theater unit, and there is a brief interruption in
audio coming from the surround speakers.
This is the normal operation of the product working to assure the best
possible performance of your home theater unit.
If the interference persists, try moving the other devices to another
Wireless LAN: approx.
1
2 m (6-
/
ft)
2
Cordless phone and other
electronic devices:
approx. 2 m (6-
1
/
ft)
2
∫ Wireless setup diagram
5.1ch
e.g.
[Compatible model: e.g. SC-PT670]
Wireless system
Surround speaker cables (included)
Surround speakers are not included.
LS: Surround (left), RS: Surround (right)
≥ Place on the side of or slightly behind the seating position.
Home theater unit
(with the digital
transmitter)
Seating
position
Publicité
