Publicité
Les langues disponibles
Les langues disponibles
Adjust the rinse aid dispenser
To achieve better drying results you can adjust how much rinse aid is
used. Follow these steps.
1. Connect the appliance to the wall power outlet
2. Within 60 seconds after step 1, press and hold the „Program" but-
ton for more than 5 seconds, then press the delay button to enter
the desired setting. The rinse aid indicator blinks once every sec-
ond.
3. Press the „Program" button to select the desired setting according
to your local requirements. The following settings are available: D1-
>D2->D3->D4->D5->D1, The most rinse aid is dispensed with the
D5 setting The default setting is D3.
Wait 5 seconds or press the power button to save the new setting and
exit the rinse aid dispenser adjustment mode.
- 60 -
Publicité
