Advanced Settings; Changing The Settings; Operating The Initial Setup Screen - Pioneer Elite BDP-53FD Mode D'emploi

Chapter 7

Advanced settings

Changing the settings

Note
• The items that can be selected depend on the player's status.
• In Options, the factory default settings are indicated in bold.
Setting
TV Screen
Video Adjust
Sharpness
(Except BDP-53FD)
Video Mode
(Except BDP-53FD)
Noise Reduction
(Except BDP-53FD)
Options Explanation
16:9 Full Select this when connecting to a wide (16:9) TV.
16:9 Normal Select this when connected to a wide (16:9) TV. 4:3 pictures are displayed
with vertical black bars along the sides.
4:3 Pan&Scan Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with the left and right sides of the image cut off to display
on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)
4:3 Letterbox Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with black bands at the top and bottom.
The quality of the playback picture can be adjusted according to the TV you are using (page 46).
High Choose the level of sharpness.
Middle
Low
Standard
Choose the video output mode.
Vivid
Cinema
Custom
0 Choose the level of noise reduction.
1
2
3
Operating the Initial Setup
screen
1 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
2 Select and set Initial Setup.
Use / to select, then press ENTER.
3 Select the item and change the setting.
Use /// to select, then press ENTER.
 Closing the Initial Setup screen
HOME MENU or
Press
RETURN.
07
41
En