Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Playback Functions
Switching the Audio Mode
Press AUDIO.
The displayed content differs from disc to disc.
BD VIDEO
DVD VIDEO
The audio track currently being played back will be
displayed.
When multiple audio tracks are recorded on the disc,
the audio track switches each time AUDIO is pressed.
DVD-RW
DVD-R
BD-RE
BD-R
The mode switches as shown below each time
AUDIO is pressed.
In the event bilingual (multiplex) broadcasts are
recorded:
•
The display will show
"MAIN", "SUB" or "MAIN SUB"
When a recorded broadcast with stereo or monaural
audio is played back:
•
"Stereo" is displayed. (Audio cannot be switched.)
NOTE
•
When you play a program recorded in stereo or monaural,
and if you are listening to the Bitstream sound via the digital
output jack, you cannot select the audio channel. Set the
digital audio output setting to "PCM" (page 21) or listen via
the analog output jacks if you want to change the audio
channel.
•
Settings for audio can be changed also in Function Control
Screen (see right).
•
Some discs allow changing of the audio channel via a
menu. For details, see the manual for the disc.
•
The display for audio automatically disappears after 5
seconds.
Switching Subtitles
If subtitles are provided in multiple languages, you can
switch between them.
Press SUBTITLE during playback.
•
The display indicates the subtitle number currently being
played back, and the subtitles appear.
•
Each time
SUBTITLE is pressed, the subtitles change.
•
You can also select "Off".
NOTE
•
Settings for subtitles can be changed also in Function
Control Screen (see right).
•
Some discs allow changing of the subtitles channel via a
menu. For details, see the manual for the disc.
•
The display for subtitles automatically disappears after 5
seconds.
Switching the Angle
If multiple angles are recorded, you can switch
between them.
1
Press
ANGLE during playback.
•
The display indicates the angle number currently being
played back. Each time you press ANGLE, the angle
switches.
1
To return to the previous angle, press ANGLE to cycle
through the angles until you return to the original angle.
Displaying the Angle Mark
You can change settings so that Angle Mark appears
in the right bottom part of the screen when multiple
angles are recorded. (The Angle Mark is displayed
for BD/DVD video.) The settings can be changed in
"Settings" – "Playback Setting" – "Angle Mark Display"
(Page 21).
NOTE
•
Settings for angles can be changed also in Function
Control Screen (see right).
•
Some discs allow changing of the angles channel via a
menu. For details, see the manual for the disc.
•
The display for angles automatically disappears after 5
seconds.
Settings During Playback
Function Control
This allows you to adjust various settings at once,
like subtitles, audio and angle settings and the title
selection for Direct Playback. The operations are the
same for BD and DVD.
Function control operation
procedure
1
Press
FUNCTION during playback.
•
The Function Control screen is displayed on the TV.
Function Control screen
BD-VIDEO
1/3
5 5
/2
C
00 : 20 : 30
2 English
1
1
5 . 1ch
Off
Select
Enter
ENTER
Return
Playback status display
Shows the operation status and the disc type.
Setting items
Selects a title (or track) or chapter for playback, or
performs subtitles, audio and angle settings.
•
Title/Track Number (Direct Title/Track Skip)
•
Chapter Number (Direct Chapter Skip)
•
Playback Elapsed Time/Specified Continued
Viewing Playback Time (Direct Time Skip)
•
Subtitle Language
•
Angle Number
•
Audio
•
Repeat
Operation guide display
Provides help on remote control button operations.
2
to select the desired setting, then
Press
press ENTER.
•
For a description of each setting, see "Functions
which can be set" (Page 20).
3
to set, then press ENTER.
Press
•
Operations vary depending on the setting. Follow the
operation instructions on the screen.
4
Press
RETURN or FUNCTION to close the
Function Control screen.
NOTE
•
If "– –" is displayed for an option like title number or
subtitles, the disc has no titles or subtitles which can be
selected.
•
The displayed items vary depending on the disc.
•
If you access the Function Control screen, it may be
impossible to operate the BD/DVD video playback. In
cases like this, close the Function Control screen.
Continuing playback from a
specified position
(Continued Viewing Playback)
BD VIDEO
BD-RE
BD-R
DVD VIDEO
DVD-RW
DVD-R
This function allows you to continue playback from a
position you specify to be played next time, even after
turning the power off.
Setting
1
During playback, press
CONTINUED at the
position from which you want to start continued
viewing playback.
•
The elapsed playing time at the specified position is
displayed at the top right of the screen.
Playing
1
Play the title for which you have set continued
viewing playback.
•
The Function Control screen appears automatically.
•
The Function Control screen can also be displayed by
pressing FUNCTION during playback.
, select the specified continued
2
Press
viewing playback time, then press ENTER.
•
Playback starts from the specified position.
NOTE
•
The continued viewing playback setting is canceled when
OPEN/CLOSE is pressed.
•
Continued viewing playback may not work properly with
some discs.
19
Publicité
Chapitres
Table des Matières
