Bosch TASSIMO FIDELIA+ TAS 65 Serie Mode D'emploi page 38

36
Problem
O
Automatic mode
not working, appliance
remains in stand-by
mode.
O
Automatic mode
skipped, appliance
goes straight to
N
Manual mode.
The quality of
the crema has
deteriorated.
Brewing unit cannot be
securely closed.
Water dripping from
the brewing unit.
More Customer Service information is available online at www.tassimo.com
Robert Bosch Hausgeräte GmbH
All manuals and user guides at all-guides.com
Possible!cause
Appliance is not switched on.
No T DISC inserted.
The barcode could not be
detected.
The barcode could not be
detected.
The drink outlet is clogged or
dirty.
Piercing unit / T DISC holder is
not properly inserted.
The T DISC is not inserted
properly.
The brewing unit is not
properly closed.
The T DISC is damaged or
leaky.
The piercing unit is either
not inserted or not inserted
properly.
Solution
Make sure the appliance is
switched on before inserting a
T DISC.
Check if T DISC has been
inserted.
Clean the bar code reading
window and try again or
smooth the barcode on the
T DISC out with your thumb.
Use another T DISC.
If problems persist contact the
TASSIMO careline.
Clean the bar code reading
window.
Use another T DISC.
You can still prepare the drink
by holding down the start / stop
button.
Remove the drink outlet
from the brewing unit and
detach the piercing unit.
After cleaning everything
thoroughly, reassemble the
parts and replace them in the
brewing unit.
Insert the T DISC holder and
piercing unit properly.
Re-insert the T DISC and
make sure it is properly
positioned.
Push the clamp down firmly
until it audibly clicks into place.
Stop the brewing process,
remove the T DISC and clean
the brewing unit.
Check to ensure that the
piercing unit is inserted
properly.
en