Eschenbach Prisma Manuel D'utilisation page 11

All manuals and user guides at all-guides.com
Installation
Plug the output cable into the rear side
of the Prisma.
Plug the mains adaptor into the plug
socket, and...
Prisma
Switch the Prisma on.
* If you do not have a SCART connection on your television set, then use the cinch video
cable and plug this into the yellow video connection (if available). If no connection is
available, ask your supplier for an RF modulator for your antenna connection.
Plug the SCART connector into the
appropriate connection on your
television set * and switch your
television on.
...connect the power cable with the
output cable.
An image should now be displayed on
your television set. If there is no
image, press the following switch on
your television control
"Video" or
- 11 -