Publicité
Les langues disponibles
Les langues disponibles
PROCOM 2 or CYCLIC 2020 regulation - SEC 7HC air treatment type
Observe the minimum installation distances.
3m
3.3 Fire
Suitable firefighting equipment must be installed and maintained in good condition in
the premises of the generators and of the linked equipment in order to limit in
particular the risk linked to the tanks of oxygen under pressure.
3.4 Packaging
The machines must be correctly protected in their original packaging, before being
transported towards their final destination.
Be careful using the cutter, because there is a risk of damaging the screen
of the PLC, the paint, the tubes or the cables. In the event of deterioration,
please contact the manufacturer.
519015-15
HOSPITAIR CABIN (MV) – 11 & 15 bar
3m
Option
1m
1m
3.5 Unloading and installation
The cabin can be handled:
• Either by a lifting truck by the 2 side
faces,
• Or by slings by the 4 corners of the roof.
(ø of the holes: 50 mm).
Consider
the
weight
dimensions, to envisage a special
transport, to consult us or your
usual partner.
To make sure that the crane -
necessary to the rising of the cabin -
is able to raise this loading.
For transport, the main components are strapped via red wedges. These straps must be
removed when starting up.
Red wedges can be removed. We advise you to keep them in case the cabin has to be
moved.
4
INSTALLATIONS
4.1 Encombrements
Refer to the HOSPITAIR CABIN Commercial Catalogue page.
4.2 Electric power supply
See the electric diagram attached to this manual (terminals and electrical connections).
All operations on the air plant shall be performed with the air plant
switched off.
Connection must be carried out by the operator.
If two backed-up electric power sources are available, it is recommended to
connect the various air production assemblies to these different power
sources.
45° minimum
and
Fork
passage
23
Publicité
