Storage; Decommissioning; Restarting - Burkert Typ 8605 Manuel D'utilisation

13.

sTOrage

noTE!
incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature. -40 °C ... +55 °C.
13.1.

decommissioning

Switch off the Control Electronics Type 8605 as follows:
→
Depressurize the system.
→
Switch off the power supply.
→
Remove the Control Electronics.
→
Store the Control Electronics in the original packaging.
13.2.

restarting

Switch on the Control Electronics Type 8605 again as follows:
→
Unpack the Control Electronics and allow it to reach room temperature before switching on again.
→
Then proceed as described in chapter
38
8.Installation.
english
Type 8605
Storage