Para (Parameter) - Controller Setting; Addr (Address) - Interfaces - Burkert Typ 8605 Manuel D'utilisation

Type 8605
Configuration
9.3.7. para (parameter) - controller setting
The controlled coil current cannot follow changes in the input signal at any random speed.
Different sets of control parameters are stored for the internal current control. The controller dynamics can
therefore be set in three discrete steps between:
• very fast control with the probably occurrence of overswing behavior and
• slow control with a guaranteed elimination of overswing.
Set 1: slow
......
Set 3: fast
Figure 23:

PArA (Parameter) - Controller setting

9.3.8. addr (address) - interfaces
Setting of the bus address when using the serial interface (0 to 31).
Figure 24:

Addr (Address) - Interfaces

english
31