Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Type 8605
Installation
8.
insTallaTiOn
8.1.
safety instructions
DangEr!
risk of injury from high pressure in the equipment!
•
Before loosening the lines and valves, turn off the pressure and vent the lines.
risk of injury due to electrical shock!
•
Before reaching into the device or the equipment,
reactivation!
•
Observe applicable accident prevention and safety regulations for electrical equipment!
Warning!
risk of injury from improper installation!
•
Installation may be carried out by authorised technicians only and with the appropriate tools!
risk of injury from unintentional activation of the system and an uncontrolled restart!
•
Secure system from unintentional activation.
•
Following assembly, ensure a controlled restart.
8.2.
electrical connections
DangEr!
risk of injury due to electrical shock!
•
Before reaching into the device or the equipment,
reactivation!
•
Observe applicable accident prevention and safety regulations for electrical equipment!
8.2.1.
cable plug version
The electrical connection of the Controller Type 8605 in cable plug version is made via a 4-pin terminal strip inside
the device.
Cable:
•
Diameter
•
Cross-section
•
Cable connections
switch off the power supply and secure to prevent
switch off the power supply and secure to prevent
6 ... 8 mm
max. 0.75 mm²
Cable gland or plug connector M12
4-pin
english
17
Publicité
Chapitres
Table des Matières
