Publicité
Les langues disponibles
Les langues disponibles
Parts of the hood
The extractor hood consists of the following parts
Dimension Drawings
Assembly
1. examination
Before starting the actual installation, the device should be checked. In addition to the control of
externally recognizable damage, a function check has to be done. Take out the device from the
packing, get rid of all packing materials and put the device with the back on the floor / table. After
connecting to a power supply, the lighting as well as the function of each stage should be checked.
Please take care that exhaust outlet is open through check.
1. Upper chimney
2. Ventilation slots
3. Wall bracket for chimney
4. Lower chimney
5. Reducer
6. Power cable with plug
7. Hood body
8. upper glass front (2 glass)
9. Grease filter
10. lower glass front
11. Touch control
12. Light LED
Publicité
