Publicité
Les langues disponibles
Les langues disponibles
Inspired by life
EVO
Altus
Sizes 41 and 51
Make sure that the left parallel rod is mounted
on the outside and the right parallel rod is on
the inside.
PLEASE NOTE!
Don't forget to apply blue Loctite to the bolts.
The right ball joint must only be replaced for
size 41.
Size 41
Use the following items to create a size 41.
2x M6x16
2x plastic sleeve
Size 51
Use the following items to create a size 51.
4x spacer
2x fixing block with screw thread
2x fixing block without screw thread
10x M6x16
2x plastic sleeve
EN52
All manuals and user guides at all-guides.com
Remount the back-rest on the frame.
Don't forget to position the shims.
Replace the arm-rest assembly on the back-rest.
Remount the cover cap and screw the ball joints
back into the arm-rest assembly.
For size 51, an M10x20 extension sleeve must
be positioned.
EN53
Publicité
