Publicité
Les langues disponibles
Les langues disponibles
Inspired by life
EVO
Altus
Use the following items to create a size 46.
2x spacer
1x fixing block with screw thread
1x fixing block without screw thread
6x M6x16
2x plastic sleeve
Remount the back-rest on the frame.
Don't forget to position the shims.
Replace the arm-rest assembly on the back-rest.
Remount the cover cap and screw the ball joints
back into the arm-rest assembly.
EN46
All manuals and user guides at all-guides.com
Remount the M8x12 round-head bolts in the
parallel rods of the Biomechanica.
PLEASE NOTE!
Don't forget to apply blue Loctite.
Slide the back-rest back into the frame and
secure it with the six M8 bolts that you removed
earlier.
Adjust the seating depth!
Remount the actuator (position split pin from
top to bottom).
Remount the head of the actuator properly.
Make sure that all the cables are put back in
their original positions.
EN47
Publicité
