Life & Mobility EVO Lectus Instructions De Montage page 19

Inspired by life
EVO Altus
The aim of these instructions is to show you
how to adjust the width between the arm
supports in the EVO Altus to 41, 46 or 51 cm.
What you need:
04: M6x16 cylinder
14: Spacer
15: Plastic sleeve
16: Fixing block without screw thread
18: Fixing block with screw thread
The width in the illustration is 41 cm. If you want
to switch from 41 cm to 51 cm, do the following:
Remove the cover cap from the back-rest.
Remove all the cables from the CxSM module.
Remove the arm supports on both sides.
To make the instructions as clear as possible, we
have removed the back-rest from the frame. You
don't have to do this.
EN36
All manuals and user guides at all-guides.com
In the illustration, the CxSM has been removed
for the sake of clarity.
Remove the bolts and unscrew the ball joints
from the arm-rest assembly.
Adjustment from 41 cm to 51 cm:
What you need:
- 4x spacer
- 2x fixing block with screw thread
- 2x fixing block without screw thread
- 10x M6x16 cylinder head
- 1x ball joint
- 1x extension sleeve
- 1x M10x20 cylinder
Remove the cover cap from the arm-rest
assembly.
EN37 EN37