Publicité
Les langues disponibles
Les langues disponibles
en
26
Repair and customer service.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Exchangeable parts
If required, you can change the following
parts yourself:
Application tools, coolant container, contact
protector
Drill-motor guide (figure 16).
After several hours of operation, the play in the dove-tail guide can increase. As a consequence,
the drill motor can glide along the dove-tail guide by itself. This can lead to the motor drifting
down and damaging the cutting tool. In this case, retighten all fastening screws of the dove-tail
guide correspondingly so that the drilling motor can easily be moved manually, yet does not
glide by itself.
Fig. 16
2,5 mm/
3/32 in
Fastening
screws
Drill-motor
guide
2,5 mm/
3/32 in
2,5 mm/
3/32 in
Publicité
