Dirt Devil Tracker M613 Mode D'emploi page 48

8 After use
8.4 Inserting the dust bin
33
34
48
If you wish to re-insert the dust bin, proceed
as follows:
1. Place the dust bin, together with a filter al-
ready inserted, back in the dust bin com-
partment (Fig. 33).
2. First, put the housing cover in place at the
front so that the 2 tabs on the cover en-
gage in the 2 slots provided (Fig. 34).
3. Then push the housing cover firmly to
close it. You will hear and feel it snap into
place.
NOTE:
The appliance can only be switched on if
the cover is correctly fitted on.
NOTE:
If you have taken off the cover when the
appliance is switched on, you must switch
the appliance off and then switch it on
again. The appliance will then start up.