Dirt Devil Tracker M613 Mode D'emploi page 46

8 After use
27
28
46
4. Next, remove the dust bin cover from the
dust bin (Fig. 27).
5. Hold the dust container over a dustbin with
the filter inserted.
6. Only separate the dust container from the
filter over a dustbin (Fig. 28).
7. Tap lightly to knock out both parts
(Fig. 28) and remove coarser debris with
your hand.
8. If dust container and filter can no longer be
completely emptied/cleaned through this
measure, proceed as described under
Chapter 8.3, 'Cleaning dust container
and filter'.